2S Mini F411 sarrafa jirgin 16*16mm hadedde OSD/BEC

Kayan samfur: Kayan kayan wasan yara na lantarki

Nau'in wasan yara: abin wasan yara na lantarki

F411 umarnin sarrafa jirgin

Umarnin Amfani (Ana Bukatar Karatu)

Akwai ayyuka da yawa na sarrafa jirgin sama da manyan abubuwan haɗin gwiwa.Kada a yi amfani da kayan aiki (kamar allura-hanci ko hannayen hannu) don murƙushe ƙwaya yayin shigarwa.Wannan na iya haifar da lalacewa mara amfani ga kayan aikin hasumiya.Hanyar da ta dace ita ce danna goro tare da yatsunsu, kuma screwdriver na iya ƙara ƙarar dunƙule cikin sauri daga ƙasa.(Ka tuna kada ku zama matsi sosai, don kada ku lalata PCB)

Kada a shigar da mai ɗaukar hoto yayin shigarwa da ƙaddamar da sarrafa jirgin.Kafin shigar da farfasa don jirgin gwaji, da fatan za a sake duba tuƙin motar da kuma alkiblar farfasa.Kada a yi amfani da ginshiƙin aluminum ko nailan wanda ba na asali ba don guje wa lalacewa ga kayan sarrafa jirgin.Ma'auni na hukuma shine ginshiƙin nailan na al'ada don dacewa da hasumiya ta jirgin.

Kafin a kunna jirgin, da fatan za a sake duba ko shigarwa tsakanin abubuwan da aka saka na hasumiya mai tashi daidai ne (dole ne a shigar da jigon fil ko waya), sake duba ko ƙwanƙolin welded tabbatacce da korau sun yi daidai, sannan a duba ko sukurun sun saba. da motor stator don kauce wa gajeren kewaye.Bincika ko an jefar da kayan lantarki na hasumiya mai tashi daga cikin solder, wanda zai iya kaiwa ga ɗan gajeren kewayawa.Idan gajeriyar kewayawa ta faru a cikin waldawar shigarwa, mai siye zai ɗauki alhakin.

Ƙayyadaddun sigogi:

Girma: 20*20MM,

Nisa mai gyara rami mai dunƙule: 16*16MM, nisa rami: M2

Girman kunshin: 37*34*18mm

Nauyi: 3g Nauyin shiryawa: 7.5g

Tsarin asali:

Sensor: MPU6000 accelerometer mai axis uku / axis gyroscope (haɗin SPI)

Saukewa: STM32F411C

Ƙarfin wutar lantarki: shigar da baturi 2S

Haɗin kai: LED_STRIP, OSD

BEC: 5V/0.5A

Gina LC tace, BF firmware support (F411 firmware)

Buzzer / Shirye-shiryen LED / Kula da wutar lantarki / shirye-shiryen daidaitawa na BLHELI;

Tsarin mai karɓa:

Support Sbus ko serial RX dubawa, Spektrum 1024/2048, SBUS, IBUS, PPM, da dai sauransu

1, DSM, IBUS, shigarwar mai karɓar SUBS, da fatan za a saita RX1 azaman hanyar shigar da bayanai.

2, Mai karɓar PPM baya buƙatar saita tashar tashar UART.

Ya dace da firam ɗin na'ura: girman firam ɗin da ke cikin 70mm ya dace (firam ɗin 70mm na iya yin ƙaramin fa'idar aiki)

Siffofin:

Ƙananan girman (girman waje shine kawai 20 * 20mm), haɗe tare da hasken LED mai daidaitacce, mai sauƙi da dacewa