100WX2 HIFI Fever high aminci Babban iko 2.0 sitiriyo Bluetooth dijital ƙarfin amplifier jirgin TPA3116

Hankali!Harka yana buƙatar haɗawa da kanku, haɗe da screwdriver.
Wannan samfurin yana cike da kayan aiki, yawanci babban aiki, farashi mai girma, an tsara shi don samar da babban ƙarfin ƙarfin ƙarfin ƙarfin ƙarfin ƙarfin ƙarfin don kiɗan HIFI.
TPA3116D2 shine Class D amplifier IC wanda kamfanin TI ya ƙaddamar, tare da manyan sigogin ƙididdiga.Mitar gyare-gyare na iya kaiwa zuwa 1.2MHZ, kuma babban ƙarfin fitarwa yana ƙasa da 0.1%.
Inductor na zobe na ja da launin toka an yi su ne musamman don masu haɓaka ƙarfin dijital, tare da ƙarancin asara, babban bandwidth, halayen aminci.
684 bakin ciki capacitor film capacitor ne na musamman capacitor ga audio amplifiers, tare da low asara, high bandwidth, da kuma high aminci halaye.
AUX da Bluetooth hanyoyin shigar da tushen sauti guda biyu, biyu cikin ɗaya.
Potentiometer don daidaita ƙarar, tare da sauyawa, mai sauƙin sarrafa ƙarar, dacewa sosai ga masu magana da DIY.
Copper DC mace shugaban, shinge tashoshi, jure babban halin yanzu, babu zafi, babu waya lalacewa, mai kyau wayoyi, ba sauki ga gajeren kewaye.
5.0 Bluetooth version, mafi girman ingancin watsawa, tsayin nisa watsawa.
Bayanan kula don amfani: Maɓallin wutar lantarki a kan allo shine maɓallin jiran aiki, kuma na'urar tana cikin yanayin jiran aiki mara ƙarfi bayan kashe mai kunnawa.Don kashe wutar gaba ɗaya ko kuma idan ba a yi amfani da shi na dogon lokaci ba, ana iya cire filogin DC da ke kan injin.
Sigar samfur
Samfurin sunan: HIF|Mataki tace 2x100W Bluetooth dijital ikon amplifier allo
Samfurin samfurin: ZK-1002
Tsarin guntu: TPA3116D2 (tare da aikin tsoma baki na AM)
Babu tacewa: LC tace (sautin ya fi zagaye da haske bayan tacewa)
Adaftar wutar lantarki mai dacewa: 5 ~ 27V (na zaɓi 9V / 12V / 15V18V / 24V adaftar, babban ƙarfin da shawarar babban ƙarfin lantarki)
Ƙaho mai daidaitawa: 50W ~ 300W, 40 ~ 80Ω
Adadin tashoshi: Hagu da dama (stereo)
Sigar Bluetooth: 5.0
Nisa watsawar Bluetooth: 15m (babu rufewa)
Tsarin kariya: sama da ƙarfin lantarki, ƙarƙashin ƙarfin lantarki, zafi mai zafi, ganowar DC, kariyar gajeriyar kewayawa
Tukwici: Sai kawai lokacin shigar da sautin ya wadatar kuma wutar lantarki/na yanzu ta wadatar za a iya samun isasshiyar ƙarfin fitarwa.Ƙarfin wutar lantarki ya fi girma, ƙarfin dangi zai fi girma, kuma ƙaho tare da nau'i daban-daban zai sami ikon fitarwa daban-daban.A cikin yanayin isasshen ƙarfin lantarki da na yanzu, mafi girman adadin ƙaho ohm, ƙaramin ƙarfin sauti na dangi, don Allah a kula!
Wutar lantarki: 12V — 8 ohm magana / 24W (tashar hagu) + 24W (tashar dama), 4 Ohm mai magana / 40W + 40W
15V —— 8 EUR / 36W + 36W, 4 EUR/mafi girma 60W + 60W
19V —— 8 EUR / 64W + 64W, 4 EUR/mafi girma 92W + 92W
24V —— 8 EUR / 76W + 76W, 4 EUR/mafi girma fiye da 110W + 110W

Amsa ga tambayoyi:

1. Yadda za a zabi wutar lantarki?

Samar da wutar lantarki na hukumar yana da mahimmanci.Mafi girman ƙarfin wutar lantarki, mafi girma na yanzu, kuma mafi yawan ƙarfin fitarwa, idan kuna da 12V/1A kawai, za ku iya kawo masu magana da 3-4 inch.Idan kun kasance 19V/5A da sama, 8-10 inci yana da kyau.Dole ne samar da wutar lantarki ya zama mai ƙima sosai.Idan ƙarfin lantarki ya yi ƙasa da ƙasa, ƙarar sauti yana da sauƙi don haifar da murɗawar sauti, idan halin yanzu ya yi ƙanƙanta don kawo lasifikar zai ja wutar lantarki ƙasa, aikin ba shi da kyau ko ingancin sauti ba shi da kyau.

An ba da shawarar yin amfani da wutar lantarki na 18V19V24V, 5A na yanzu ko fiye.Idan kawai kuna da wutar lantarki ta 9V12V ko 1A 2A, ana iya amfani da ita kuma amma ƙarfin ƙarami ne, kula da matsakaicin ƙarar lokacin amfani yana iya gurbata ingancin sauti.

2. Yadda za a zabi mai magana?

Kaho da aka saba amfani da su gabaɗaya 8 ohms, ba za su iya bambanta tsakanin ingantacciyar polarity mara kyau da mara kyau ba, tasirin iri ɗaya ne, Hakanan ana iya amfani da 4 ohms na ƙaho.Idan ƙarfin ƙahon ku ƙarami ne, yana iya kasancewa tsakanin 10W-30W kuma ana iya amfani da shi, ƙarfin samar da ƙarami ne don hana ƙara bayan kona ƙahon, kamar zaɓin wutar lantarki ƙasa da 15V.Idan kun kasance ƙaho na 50W-300w, kada ku damu da matsalar ƙaho mai ƙonewa, za ku iya zaɓar wutar lantarki na 12-24V, mafi girman ƙarfin da aka zaɓa, sannan mafi girma sautin fitarwa ko iko.

3. Yadda ake zaɓar yanayin shigar da sauti na Bluetooth ko AUX?

Powerarfi akan allon ƙara ƙarfin lantarki, haɗa lasifikar, kunna kullin sautin shuɗi mai nuna haske, buɗe Saitunan wayar — Bluetooth — bincika “BT-WUZHI”, sannan danna haɗi, bayan haɗin haɗin kai yayi nasara, za a sami saurin ding dong. sautin, a wannan lokacin don yanayin Bluetooth, zaku iya kunna kiɗan, za a haɗa wuta ta gaba ta atomatik zuwa wayar.

Idan kana son amfani da shigar da sauti na AUX, za ka iya cire haɗin haɗin Bluetooth, za a kuma sami saurin sauti, toshe kebul na audio don kunna kiɗa.A cikin yanayin AUX (LINE IN), Bluetooth yana canzawa ta atomatik zuwa yanayin Bluetooth.

4. Ƙaramin sauti yana da kyau, bayan sautin ya yi ƙarfi, akwai wani abin mamaki na sautin girgije?

An gurbata sautin, da fatan za a canza adaftar wutar lantarki tare da matakin ƙarfin lantarki mafi girma.

5. Ƙaramin sauti yana da kyau, bayan sautin ya yi ƙara, akwai wani abu na jinkirin sauti?

Ƙarfin shigarwar bai isa ba, wutar lantarki da kanta tana kashe kariya ta lokaci-lokaci, da fatan za a maye gurbin wutar lantarki mafi ƙarfi;Ko kuma ƙarfin ya yi girma sosai, allon ƙarar wutar lantarki yana da zafi sosai, kuma akwai kariya ta thermal.Rage amfani da wutar lantarki ko duba ko kwandon zafi ya dace da kyau don ƙarfafa watsar da zafi.